Moon Dog/ Soapmaking Guides
Cold-Process Soap

Cocoa Butter in soap: SAP value, lye amount & what it does

Updated 20264 min read

Cocoa Butter has a SAP value of 0.137 g NaOH per gram, and it leans toward hardness in the bar. Here are the exact lye numbers and how it behaves.

SAP value & how much lye cocoa Butter needs

The saponification (SAP) value of cocoa Butter is 0.137 g NaOH per gram of oil (0.193 g KOH per gram for liquid soap). So 500 g of cocoa Butter needs about 68 g of NaOH at 0% superfat, or roughly 65 g at a 5% superfat. Always confirm your full recipe in a lye calculator — SAP is an average and lye is unforgiving.

What it brings to the bar

At 100% (a single-oil bar), its fatty-acid profile works out to these SoapCalc-style qualities (typical range in brackets, per Kevin Dunn):

  • Hardness: 60 [29–54] — high
  • Cleansing: 0 [12–22] — low
  • Conditioning: 38 [44–69] — low
  • Bubbly lather: 0 [14–46] — low
  • Creamy lather: 60 [16–48] — high

How to use it

Cocoa Butter is very hard and long-lasting but can feel brittle or draggy alone; it's typically 10–30% of a recipe to firm up softer oils.

FAQ

What is the SAP value of cocoa Butter?

Cocoa Butter has a SAP value of 0.137 g NaOH per gram of oil (0.193 g KOH per gram). Multiply your oil weight by that to get the lye at 0% superfat.

How much lye do you need for cocoa Butter?

About 68 g of NaOH for 500 g of cocoa Butter at 0% superfat, or ~65 g at 5% superfat. Always verify the whole recipe in a lye calculator.

Is cocoa Butter good for soap?

Yes — used correctly. Cocoa Butter is very hard and long-lasting but can feel brittle or draggy alone; it's typically 10–30% of a recipe to firm up softer oils.

What you need to soap with it

Cold-process soap is lye chemistry — accuracy and protection matter more than the mold.

Some links above are affiliate links — if you buy through them, Moon Dog may earn a small commission at no extra cost to you. We only point to gear we'd actually use.

The app for this
Trace runs the full lye + quality math for your recipe
Build a recipe from cocoa Butter and any other oils, set your superfat and water, and Trace computes the exact NaOH or KOH, water, and the hardness/cleansing/conditioning/bubbly/creamy profile — each number cited to Kevin Dunn's Scientific Soapmaking. Pay once, no subscription, works offline.
Get Trace on the App Store

Sources

SAP values and fatty-acid profiles are typical published averages; every batch of oil varies slightly, so always run your final recipe through a lye calculator. Lye is caustic — soap at your own risk with proper protection.