Coconut Oil in soap: SAP value, lye amount & what it does
Coconut Oil has a SAP value of 0.190 g NaOH per gram, and it leans toward hardness in the bar. Here are the exact lye numbers and how it behaves.
SAP value & how much lye coconut Oil (76° melt) needs
The saponification (SAP) value of coconut Oil (76° melt) is 0.190 g NaOH per gram of oil (0.266 g KOH per gram for liquid soap). So 500 g of coconut Oil (76° melt) needs about 95 g of NaOH at 0% superfat, or roughly 90 g at a 5% superfat. Always confirm your full recipe in a lye calculator — SAP is an average and lye is unforgiving.
What it brings to the bar
At 100% (a single-oil bar), its fatty-acid profile works out to these SoapCalc-style qualities (typical range in brackets, per Kevin Dunn):
- Hardness: 79 [29–54] — high
- Cleansing: 67 [12–22] — high
- Conditioning: 9 [44–69] — low
- Bubbly lather: 67 [14–46] — high
- Creamy lather: 12 [16–48] — low
How to use it
Coconut Oil is very high in cleansing (lauric + myristic), which strips skin above roughly 30% of a recipe — most soapers keep it to 15–30% for lather and hardness, balanced with conditioning oils.
FAQ
What is the SAP value of coconut Oil (76° melt)?
Coconut Oil has a SAP value of 0.190 g NaOH per gram of oil (0.266 g KOH per gram). Multiply your oil weight by that to get the lye at 0% superfat.
How much lye do you need for coconut Oil (76° melt)?
About 95 g of NaOH for 500 g of coconut Oil (76° melt) at 0% superfat, or ~90 g at 5% superfat. Always verify the whole recipe in a lye calculator.
Is coconut Oil (76° melt) good for soap?
Yes — used correctly. Coconut Oil is very high in cleansing (lauric + myristic), which strips skin above roughly 30% of a recipe — most soapers keep it to 15–30% for lather and hardness, balanced with conditioning oils.
What you need to soap with it
Cold-process soap is lye chemistry — accuracy and protection matter more than the mold.
- Weigh oils and lye to the gram on a 0.1 g digital scale — soap is made by weight, never volume.
- Use fresh sodium hydroxide (NaOH) lye for hard bar soap; KOH is for liquid soap.
- Always wear splash goggles and nitrile gloves — lye is caustic until the soap fully saponifies.
Some links above are affiliate links — if you buy through them, Moon Dog may earn a small commission at no extra cost to you. We only point to gear we'd actually use.
Sources
SAP values and fatty-acid profiles are typical published averages; every batch of oil varies slightly, so always run your final recipe through a lye calculator. Lye is caustic — soap at your own risk with proper protection.