Corn Oil in soap: SAP value, lye amount & what it does
Corn Oil has a SAP value of 0.136 g NaOH per gram, and it leans toward conditioning in the bar. Here are the exact lye numbers and how it behaves.
SAP value & how much lye corn Oil needs
The saponification (SAP) value of corn Oil is 0.136 g NaOH per gram of oil (0.191 g KOH per gram for liquid soap). So 500 g of corn Oil needs about 68 g of NaOH at 0% superfat, or roughly 65 g at a 5% superfat. Always confirm your full recipe in a lye calculator — SAP is an average and lye is unforgiving.
What it brings to the bar
At 100% (a single-oil bar), its fatty-acid profile works out to these SoapCalc-style qualities (typical range in brackets, per Kevin Dunn):
- Hardness: 13 [29–54] — low
- Cleansing: 0 [12–22] — low
- Conditioning: 87 [44–69] — high
- Bubbly lather: 0 [14–46] — low
- Creamy lather: 13 [16–48] — low
How to use it
Corn Oil is very high in conditioning (mostly oleic/linoleic), so a 100% bar is soft and slow to trace. It's usually a large but not sole part of a recipe, cured long, or hardened with a saturated oil.
FAQ
What is the SAP value of corn Oil?
Corn Oil has a SAP value of 0.136 g NaOH per gram of oil (0.191 g KOH per gram). Multiply your oil weight by that to get the lye at 0% superfat.
How much lye do you need for corn Oil?
About 68 g of NaOH for 500 g of corn Oil at 0% superfat, or ~65 g at 5% superfat. Always verify the whole recipe in a lye calculator.
Is corn Oil good for soap?
Yes — used correctly. Corn Oil is very high in conditioning (mostly oleic/linoleic), so a 100% bar is soft and slow to trace. It's usually a large but not sole part of a recipe, cured long, or hardened with a saturated oil.
What you need to soap with it
Cold-process soap is lye chemistry — accuracy and protection matter more than the mold.
Some links below are affiliate links — if you buy through them, Moon Dog may earn a small commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. We only point to gear we'd actually use.
- Weigh oils and lye to the gram on a 0.1 g digital scale — soap is made by weight, never volume.
- Use fresh sodium hydroxide (NaOH) lye for hard bar soap; KOH is for liquid soap.
- Always wear splash goggles and nitrile gloves — lye is caustic until the soap fully saponifies.
Sources
SAP values and fatty-acid profiles are typical published averages; every batch of oil varies slightly, so always run your final recipe through a lye calculator. Lye is caustic — soap at your own risk with proper protection.